Resilient Flexible Self Supporting Silt Fence (RFSS)

Home | Contact Us | Tell A Friend | Site Map

SiltShield use and installation options

Three Fundamental methods

1.Basic Installation
This method is intended For locations with existing curbing. SILTSHIELD is placed against the rear of the curb six inches deep then backfilled and compacted.
(the backfill, when compacted, must be at the height of the curb.)

2.New Curbing Installation
This second method is suggested for locations where advance planning affords the opportunity to save time and labor using our CurbClaws T.M. CurbClaws secure Siltshield in place until curbing is backfilled (Refer to our CurbClaw Installation sheet.)

3.Trench Installation
This last method is intended for open field or perimeter applications. Place Siltsheild in a six inch deep trench, backfill and compact.

Three Fundamental methods
	1.Basic Installation This method is intended For locations with existing curbing. SILTSHIELD is placed against the rear of the curb six inches deep then backfilled and compacted. (the backfill, when compacted, must be at the height of the curb.)
	2.New Curbing Installation This second method is suggested for locations where advance planning affords the opportunity to save time and labor using our CurbClaws T.M. CurbClaws secure Siltshield in place until curbing is backfilled (Refer to our CurbClaw Installation sheet.)
	3.Trench Installation This last method is intended for open field or perimeter applications. Place Siltsheild in a six inch deep trench, backfill and compact.